Clean the lint trap

Do this before every load, and again after. A clean lint trap dries your clothes faster and keeps the dryer safe.

Where it is

Open the dryer door. The lint trap is the screen at the bottom of the door opening.

Huebsch dryers

  • The screen is built in. Don’t try to pull it out.

  • Wipe the lint off the screen with your fingers. Lift it up and away. Don’t push it down through the screen.

  • Throw the lint in the trash.

Whirlpool stack dryers

  • Pull the screen straight up and out.

  • Roll the lint off with your fingers. Don’t rinse or wash the screen.

  • Throw the lint in the trash.

  • Push the screen firmly back into place. Never run the dryer without it.

Why it matters

  • Drying time. A dryer works by moving air through your clothes. A screen blocked by lint slows the air, so the load takes longer and costs you more.

  • Safety. Lint burns easily. Keeping the screen clean is the first protection against a dryer fire.

  • The next person. Clean it after your load too, and the dryer is ready for them.

If something is wrong

  • A screen that is torn, missing or won’t go back in: don’t use that dryer. Tell me.

  • Clothes still damp with a clean screen: see Clothes still wet.

  • Loads taking longer than usual: tell me. The vent may be blocked.

The steps for your dryer are under Dryers.

Clean the lint trap before every load, and again afterTwo lint screens. Left: the mesh is covered with a mat of grey lint. Right: the mesh is clean.Lint on the screenWipe it off before everyload, and again after.CleanDries faster and keeps thedryer safe. Cleaning the lint trap on a Whirlpool dryerThree steps. The screen is pulled straight up out of its slot at the bottom of the door opening; the lint is rolled off it with the fingers; the clean screen is pushed back down into the slot.Pull the screenstraight up andoutRoll the lint off withyour fingersPush the screenfirmly back intoplace